Panasonic PT-EZ770ZLU Projector Lamp with Module

Want to confirm that this is a 335W UHM Lamp Asked by Bryan C. On Jul 26, 2017

MyProjectorLamps.com offers 335 watt bulb with module for the ET-LAE300.

Yes, this is a PHILIPS=UHM or ultra high performance with mercury bulb.

Does this module work with the Panasonic PT-EZ770ZEJ projector? Asked by Greg E. On Feb 04, 2020

No, this specific module and lamp do not fit into Panasonic PT-EZ770ZEJ projector as it is not listed above in "Suitable Projectors".

Do you have the lamp for the Panasonic ET-LAE300 projector in stock? If so, what is the estimated time of arrival? Asked by Kaushal D. On Jun 02, 2020

Please contact our sales team: sales@myprojectorlamps.com to see if the lamp for Panasonic ET-LAE300 is in stock.

Will this lamp fit into A PANASONIC PROJECTOR MODEL PT-EW730Z /EW 730 WXGA? Asked by BYRON M. On Mar 12, 2022

Yes, this lamp will fit into your Panasonic PT-EW730Z projector as the projector is listed above in "Suitable Projectors".

Is the ballast included with the module for ET-LAE300? Asked by Charles R. On Jan 30, 2023

We do not include the projector ballast with the module for the Panasonic ET-LAE300 projector. Please contact our customer support: 1-888-785-2677 for more information about ballasts and to see if we sell any ballasts. Or contact your projector manufacturer to order ballasts.

On the top of the projector it is PT-EW540 and then underneath EW540 WXGA. Is this the correct lamp for this projector and will I be able to fit this bulb into my projector myself or will I need a specialist/technician to put the bulb/bulb and module in my projector? Asked by Alison E. On Nov 01, 2023

The PT-EW540 is the projector and underneath the projector is incorrect and we do not sell a bulb for the EW540 WXGA, but they are the projectors. The bulb you need is Internal SKU#: MPLL09900 or the Panasonic ET-LAE300 bulb. No, you do not need a specialist/technician to put the bulb into your projector. To install a bare projector bulb, follow these steps. First, remove the retaining clip holding the old lamp in place. Then unscrew the wires connected to the bare projector bulb. Next replace the old lamp with a brand new replacement bulb and fasten the clip. Lastly, tighten the screws. To insert a bulb and module follow these steps. Make sure the projector is unplugged and sitting on a flat surface. Loosen the screw holding the projector lamp module cover in place and remove the panel. Unplug the old projector lamp and remove it from the projector. Plug the new projector lamp securely into place. Attach the panel back onto the projector and tighten the screw.

I have 2 wires from my module connected to my old lamp, but I can't unplug them. Is there a way to unscrew the whole unit? Asked by Carlos M. On Apr 30, 2025

Is this an original or OEM Panasonic lamp and module? Asked by Theresa G. On Jun 05, 2025

All of our lamps, including the lamps used in your Panasonic projector, are original equipment manufacturer (OEM) lamps, utilizing lamps of similar quality the projector companies use. Panasonic uses OSRAM, PHILIPS, and USHIO as their lamp manufacturers. Our modules are MyProjectorLamps branded.